Single & Multiple location
of the metal mass detected
-
Complete
Security Detection
-
Highly
Visible Double Display provides Single or Multiple
Location of Weapons in Transit
-
Very High
Speed of Detection
-
High
Immunity to External Interferences
-
Direct
Selection of the International Security Standards
-
High
Reliability
-
Local or
Remote Programming with Networking Capabilities
|
The
HI-PE Multi Zone is a high performance walk-through
metal detector which exceeds all International Security
Standards.
A "height on person" display actually indicates, by
means of illuminated LEDs, the position of the weapon
on the person. Three operating modes are available:
Floating (standard): the location zones are not
fixed, as in the case of metal detectors with multiple
receiver-transmitter coils, but are variable and
continuous so as to achieve optimum resolution;
8-Zones and 4-Zones: the alarm threshold can
be adjusted individually for each zone. The panels are
washable and they are equipped with shock absorbent
edges to protect them against damages.
HI-PE Multi Zone can be supplied, on request,
with two emergency batteries that automatically come
into operation in the event of a mains failure. A
photocell transit counter is available as an option.
This will allow for statistical data to be accumulated
on the persons passing through the detector.
The detector's control unit is incorporated into the
structure. Access to programming is protected both by a
mechanical lock and by two alphanumeric passwords.
The HI-PE Multi Zone is manufactured using the most
advanced electronics technology, conforming to ISO
9001 Quality Control Standard procedures.
Main features
- Immediate selection
of International Security Standards.
- Detection of
magnetic, non-magnetic and mixed alloys metal weapons.
- High detection
speed: up to 15 m/s (45 ft/s)
- Very high immunity
to both electrical and mechanical interference.
- Programmable
operation controlled by microprocessor.
- Programming: via
built-in keypad and display or RS232/RS485 serial
connection to Remote Control Unit (RCU), PC or
computer network.
- Programming access
protected by a mechanical lock and two alphanumeric
passwords.
- Cable-free automatic
synchronisation between two or more Metal Detectors at
a minimum distance of 5 cm (2 inches) from each other.
- High-integration
professional electronics and maximum reliability.
- Control unit
incorporated into the detector.
- No need for initial
or periodic calibration.
- Easy maintenance:
modular control unit for a rapid replacement.
- Colour: light grey
RAL 7040.
Installation Data
- Power Supply: 115 /
230 VAC, ±15%, 45-65 Hz, 30 VA MAX.
- External interface:
RS-232C for connection to a Remote Control Unit (RCU),
a terminal, a computer, an external modem or other
CEIA metal detectors.
- Operative
temperature: from -15°C (5°F) to +70°C (158°F)
- Relative humidity:
from 0 to 95% (without condensation).
Certification and
Conformity
- Harmless to wearers
of pacemakers, defibrillators or other vital support
systems, pregnant women and magnetic storage media
(floppy disks, audio cassettes, video cassettes and
similar).
- Conforms to the
current International Security Standards for
Walk-Through Metal Detectors.
- Complies with EC
Regulations and International Standards relating to
Electrical Safety and Electromagnetic Compatibility
(EMC).
Alarms
Visible
Signals
- Multi-zone display
bar for "height on person" localisation.
- High intensity
display.
- Green and red
metering signals proportional to the mass of the
object detected.
Audible
Signals
- High acoustic
intensity alarm signal.
- Volume and tone of
alarm signal can be programmed.
|
